Box with sliding lid generator

A box sized by what goes inside it, with a lid that slides shut. Type the inside length, width and height, and how many compartments along and across.

Box with sliding lid generator: the part as it comes

How to make yours

  1. Measure what goes inside and type the inside length, width and height.
  2. Choose how many compartments along and across.
  3. Set the wall, and the lid fit gap: bigger if the lid is too tight on your printer.
  4. Download it as STL, 3MF or STEP, and print the box and its lid together.

What each slider does

Inside length 20 to 250 mm
The inside length of the box.
Inside width 20 to 250 mm
The inside width of the box.
Inside height 10 to 150 mm
The inside height, up to the lid.
Compartments along 1 to 8
How many compartments along the length.
Compartments across 1 to 6
How many compartments across the width.
Wall 2 to 4 mm
How thick the outside walls are.
Lid fit gap 0.1 to 0.6 mm
The play between the lid and its groove. Raise it if the lid sticks.

Also called

box with sliding lid, sliding lid box, custom box generator, storage box, box with lid, parts box, compartment box, pencil box, small storage box.

Ready