Drawer organizer generator

A tray that fits your drawer, split into as many compartments as you like. Type the space you have; the compartments share it out.

Drawer organizer generator: the part as it comes

How to make yours

  1. Measure the space in your drawer: length, width and height.
  2. Type those three numbers. The tray is sized by its outside, so it fits.
  3. Choose how many compartments along and across, and how round their corners are.
  4. Download it as STL, 3MF or STEP, and print it.

What each slider does

Length (outside) 50 to 250 mm
The tray's outside length, the long side of the space in your drawer.
Width (outside) 50 to 250 mm
The tray's outside width.
Height 10 to 100 mm
How tall the tray is.
Compartments along 1 to 6
How many compartments along the length.
Compartments across 1 to 6
How many compartments across the width.
Walls 1.2 to 3 mm
How thick the walls are, outside and between compartments.
Floor 0.8 to 4 mm
How thick the floor is.
Inside corner radius 1 to 15 mm
How round the inside corners are, so small parts sweep out easily.

Also called

drawer organizer, drawer tray, desk organizer, divider tray, compartment box, parts tray, custom drawer insert, storage tray, organizer generator, drawer divider.

Ready