Box with lid generator

A box sized by its outside with a lid that presses on. Type the length, width and height; the lid prints beside it.

Box with lid generator: the part as it comes

How to make yours

  1. Type the box's outside length, width and height.
  2. Set the wall and the floor.
  3. Set how far the lid fits over and how snug it is.
  4. Download it as STL, 3MF or STEP, and print box and lid.

What each slider does

Length (outside) 30 to 240 mm
How long the box is, outside.
Width (outside) 30 to 120 mm
How wide the box is, outside.
Height 15 to 150 mm
How tall the box is, without its lid.
Wall 2.4 to 5 mm
How thick the walls are.
Floor 1.2 to 4 mm
How thick the floor is.
Lid fits over (lip height) 3 to 10 mm
How far the lid comes down over the box.
Lid thickness 1.2 to 4 mm
How thick the top of the lid is.
Lid fit gap 0.05 to 0.4 mm
How much room the lid has over the box; more is looser.

Also called

box with lid, storage box, container with lid, press fit lid, gift box, parts box, custom box, small box, box generator, lidded box.

Ready